
Synergist Consistent 001
Compatibility agent Synergist Consistent 001:
Synergist Consistent 001 is a tank-mix compatibilizer that is resistant to high electrolytes can be used to solve the flocculation and sedimentation problems that occur when pesticides are mixed. In areas with high hard water or in the case of foliar fertilizers and organic fertilizers containing electrolyte ions in the package, It can also effectively improve the problem of liquid flocculation and sedimentation. It can significantly improve the tank-mixing compatibility of diluted liquid medicine over time and solve the problem of inflexible formulation of fly-proof medicine.
The recommended dosage is 5g~10g/acre, and the recommended dilution factor is not higher than 500 times. Add part of the water and fertilizer first, then add the adjuvants, and then add the pesticide diluent.
Specification:
|
Item |
Standards |
|
Appearance |
Yellow Liquid(30℃~40℃) |
|
Yellow Viscous Liquid(Under 30℃) |
|
|
pH value |
5.7 |
|
Soild Content(%) |
39.8 |
|
Specific Gravity(25℃) |
1.05 |
Features:
a.Easy tank mixing.
b.Electrolyte resistant(can be applied to foliar fertilizer including high concentrated ions like K+, Ca2+, Mg2+, PO43+)
c.Especially benefits air spray mod(water volume about 12-15L/ha )
d.Helps to sustain stable suspension and deflocculation upon multi-formulation mixture of OD, EC, ME.
e.Leads to fast spreading with more retention.
f.Helps drift control and anti evaporation.
Applied Case 1
|
Crop |
Paddy rice |
|
Pests and disease |
Rice planthopper\Rice stem borer\Rice leaf folder\Rice blast\Banded sclerotial blight |
|
Product combination |
25% Pymetrozine SC;10%Trifloxystrobin+ 2% Tebuconazole SC; 5% Abamectin EC;Foliar fertilizer |
|
Location |
South China |
|
Water hardness |
1000ppm |
|
TEMP |
>25℃ |
|
Spray mode |
By air(UAV,water volume 15L/ha) |
Stability of spray solutions(sample C/B/A) are observed by TURBISCAN
|
Components of spray solution and tank mixing sequence |
Concentration g/ha |
Dilution fold in spray |
Sample C |
Sample B |
Sample A |
|
Adjuvant CONSISTENT 001 |
150 |
×100 |
* |
||
|
KH2PO4(Fertilizer) |
600 |
×25 |
* |
* |
|
|
25% Pymetrozine SC |
450 |
×33.3 |
* |
* |
* |
|
10% Trifloxystrobin + 2% Tebuconzaole SC |
600 |
×25 |
* |
* |
* |
|
5% Abamectin SC |
1500 |
×10 |
* |
* |
* |



Turbulence arising in fig.of sample B compared with sample C, means that when the spray solution was added with foliar fertilizer(KH2PO4), significant particle migration occurred, like flocculation and settling, making solution physically unstable.
Reduced turbulence was found in fig. Of sample A, when adjuvant "CONSISTENT 001" was added. It demonstrates that "CONSISTENT 001" gives positive effect to spray solution stability, improving compatibility between pesticide and foliar fertilizer during tank mixing process.
Interface Characterization
|
Surface tension(mN/m)(22℃,55%) |
Contact angle(°) |
Wetting(s) |
Spreading index*1 |
Retention index*2 |
|
|
Sample B |
31.71 |
57.79 |
886 |
2.5 |
1.69 |
|
Sample A |
27.05 |
30.62 |
47 |
4 |
2.3 |

Stand for 6h,30℃
*1 Compared with pure water(value=1), the higher value the better spreading.
*2 Compared with pure water(value=1), the higher value the better retention. Method of analysis is available upon request.
By introducing adjuvant "CONSISTENT 001", the spray solution exhibits lower surface tension and faster wetting, showing desired foliar spreading and droplet retention.
Applied Case 2
Another field trial was carried out on wheat field, which demonstrates similar improved performance by addition of adjuvant"CONSISTENT 001".

After dilution Stand for 6h, 30℃
Treatment and performance comparision
|
Componentsofspray solution and tank mixing sequence |
1# |
2# |
3# |
|
Adjuvant CONTSISTENT 001 |
* |
||
|
Adjuvant A* |
* |
||
|
KH2PO4 |
* |
* |
* |
|
430g/l Tebuconazole SC |
* |
* |
* |
|
4.5%β-Cypermethrin EC |
* |
* |
* |
*Adjuvant on the market for tank mix compatibility purpose
FAQ:
How to use adjuvant "CONSISTENT 001"?
Use in tank mix generally appliced by air spray. Addition of 150g/ha (about 100 fold dilution) is suggested, or consult with our chemists in advance.
Tips on handling tank-mix of pesticide with ferilizer:
a.Follow tank mixing sequence as below:
Adjuvant "CONSISTENT 001" → Foliar fertilizer → WDG → SC → ME → EW → SL → EC
b.Better to use up spray solution as soon as it has been prepared.
c.Dilute each component separately and mix.
d.Foliar fertilizer should be in a proper concentration and dissolved completely.
e.A pH range of 5~8 is preferred to ensure crop absorption of nutrients.
Hot Tags: Synergist Consistent 001, China Synergist Consistent 001 manufacturers, suppliers, fungicide adjuvant for mixing, fungicide adjuvant for stabilizer, insecticide adjuvant for stability
Send Inquiry
